Bai de laborator termo-reglabile

Avantaje
- Control electronic automat pentru reglarea temperaturii (PI) si display digital
- Display: LED
- Afisarea temp. in trepte de 0,1°C
- Protectie la supraincalzire in functie de temperatura setata / variatia de +1°C
- Protectie la scaderii nivelului de apa
- Elementul de incalzire, interiorul, capacul si tava perforata sunt confectionate din otel inox
- Capac izolat termic cu pereti dubli
- Carcasa exterioara din otel galvanizat cu rezistenta la coroziune
- Robinet de scurgere situat in partea din spate a baii

Conformitate - Certificate - Standarde
• Certificat de Calitate ISO 9001:2000
• Declaratie de Conformitate,
• Certificat de garantie si 10 ani post garantie

Seria GFL

The range of Incubation and Inactivation Baths comprises seven models with five different sizes of 7 to 40 l capacity.
Water Bath 1005 is especially suitable for warming medical hot packs.

Specifications and features
- Short heating-up times.
- Temperature display and setting digitally via LED display, in 0.1 °C increments.
- Fast and exact setting, exact reproducibility of the set value.
- Electronic monitoring of the temperature regulator. In case of failure, the cause of the fault is shown on the display.
- Soft-touch keys with clear symbols; Two-finger operation prevents unintentional alterations of the set value.
- Interior (bath interior and heating element, cover frame, lid and perforated floor) made of stainless steel.
- Standard equipment: lid and perforated floor.
- Water Bath 1005 is supplied without perforated floor if the rack for hot packs 1923 (accessory) is ordered.

Accesorii optionale pentru bai GFL
- Indicator de nivel ajustabil / Adjustable Water Level Regulator to keep the water level constantand to cool Water Baths (approx. 3 °C above tapwater temperature) :: cod produs: 1012-1013
- Agent de protectie in sticla de 200 ml/ Water Bath Protection Agent prevents the formation of algae, bacteria and mould. concentrate 4 ml per 1 litre of water / 1 bottle 200 ml :: cod produs 1910
- Capac inox cu inele concentrice / Lid with openings can bechosen between 52 and 192 mm, in steps of 20 mm.
- Suport pentru eprubete

Băile de termostatare OVAN sunt aparate de laborator care mențin temperatura constantă, reglabilă într-o baie de apă sau ulei siliconic; Băile sunt confecționate din inox și sunt dotate cu capac din inox împotriva evaporării.
Programarea temperaturii și a timpului de termostatare se realizează optional (dupa model) cu ajutorul unui controler analogic sau digital multifuncțional cu microprocesor integrat.

Avantaje
- Control electronic automat pentru reglarea temperaturii (PI) si display digital (modele digitale)
- Display: LCD
- Afisarea temp. in trepte de 1°C
- Protectie la supraincalzire in functie de temperatura setata / variatia de +1°C
- Protectie la scaderii nivelului de apa
- Elementul de incalzire, interiorul, capacul si tava perforata sunt confectionate din otel inox
- Capac inox
- Carcasa exterioara din otel galvanizat cu rezistenta la coroziune
- Robinet de scurgere (drenaj)
- Memorie pentru ultimele setarii

Conformitate - Certificate - Standarde
• Certificat de Calitate ISO 9001:2000
• Declaratie de Conformitate
• Certificat de garantie si 10 ani post garantie

Seria OVAN - Analogic

Seria OVAN digital

OVAN Analogic Digital Thermostatized baths Inner tank made of stainless steel AISI 304 and metallic housing protected with Epoxi paint of great resistance to aggressive surroundings
Temperature controlled by means of an hydraulic thermostat, for water and oil.
Heating resistance embedded made of special alloy of stainless steel, heat and corrosion resistant.
Temperature thermostat synchronized with the “on” indicator lamp.
Safety cut out thermostat with indicator lamp.
The unit will cut out if there is insufficient liquid or if the temperature exceeds the maximum admissible temperature.
Water drainage faucet and handles for a easy transport.
Includes stainless steel cover-resistance.

OVAN Digital Thermostatized baths
Inner tank made of stainless steel AISI 304 and metallic housing protected with Epoxi paint of great resistance to aggressive surroundings
Temperature controlled by microprocessor, with electronical regulation; for water or oil.
Heating resistance of special alloy of stainless steel heat and corrosion resistant.
Digital Display LCD backlighted showing the selected and actual temperature.
The equipment includes an integrated timer that allows (if needed) a programmed start during the next 24 hours.
Membrane push-button control.
Double safety thermostat:
Cut out indicator lamp.
The unit will cut out if there is insufficient liquid or if the temperature exceeds the maximum temperature. Safety automatic disconnection with acoustic alarm that prevents overheating from the programmed temperature (+5°C). Connects again when the Tª is below the limit. Indication on the display of high temperature on the tank, that provides protection against burn. From 45°C.
Automatic restart after unexpected shut down keeping the same parameters as before the incident. An incident sign appears on the display.
Memory of the last settings.
Water drainage faucet ( for volumes from to 20 l up)and handles for a easy transport.
Includes stainless steel cover-resistance.

Accesorii optionale pentru bai seria OVAN

Accesorii optionale	Cod produs
Dispozitiv pentru mentinere nivel constant de apa Constant liquid level * For water baths* order together with the bath (it has to be mounted in the factory)	20000-00111
Thermometer and support max 100°C	20000-00120
Support for Thermometer	20000-00183
Capac cu orifici si inele concentrice / Cover with disc adapters
with 2 disc adapters for baths of 5L	20000-00100
with 4 disc adapters for baths of 12L	20000-00101
with 6 disc adapters for baths of 20L or 2 units for baths of 45L	20000-00102
Set of disc adapters	20000-00189
Capac otel inox / Cover of stainless steel
For baths of 5L	20000-00105
For baths of 12L	20000-00106
For baths of 20L	20000-00107
For baths of 45L	20000-00108
Dispozitive de prindere pentru suport eprubete / Support for tube racks
For baths of 5L	20000-00161
For baths of 12L	20000-00162
For baths of 20L or 2 for baths of 45L	20000-00163
Suport eprubete / Tube racks*
36 tubes Æ13mm	20000-00164
24 tubes Æ 16mm	20000-00165
24 tubes Æ 20mm	20000-00166
* Bath capacity: 5L – 1 rack 12L – 3 racks 20L – 5 racks 45L – 2x5 racks

Băi digitale termoreglabile seria FALC WB-MD sunt ideale pentru
Exterior modele WB-MD 5 - 15 - 24 din ABS / model WB-MD 50 din otel inox vopsit epoxy
Termoregulator analogic
Termostat de siguranta/protectie integrat
Cuva de incalzire din otel inox cu izolatie / pereti dubli
Control electronic de temperatura cu microprocesor integrat
Termostat de siguranta cu avertizare bec rosu

Conformitate - Certificate - Standarde
• Certificat de Calitate ISO 9001:2000
• Declaratie de Conformitate
• Certificat de garantie si 10 ani post garantie

Seria FALC WB-MD

Main features
Digital microprocessor pid control
Interior tank made of Stainless Steel (all models)
External case for WB-MD 5 - 15 - 24 in ABS for WB-MD 50 in steel painted with epoxy paint
General safety switch
Analogic thermoregulator
Integrated safety thermostat
High insulation between external case and tank
Bottom of the tank with rounded corner for easy cleaning

Accesorii optionale pentru bai seria FALC WB-MD
- Suport eprubete cu 3 rafturi din inox / Stainless steel with 3 shelves
12 locuri Ø21 de 125x100x150
48 locuri Ø21 de 250x170x150
48 locuri Ø21 de 250x170x150
48 locuri Ø21 de 250x170x150
20 locuri Ø17 de 125x100x150
60 locuri Ø17 de 250x170x150
60 locuri Ø17 de 250x170x150
60 locuri Ø17 de 250x170x150
- Capac din PC / Polycarbonate gable lid (rezistenta pana la 120°C)
- Capac otel inox / Stainless steel gabled lid
- Capac otel inox cu 2, 4, 6 si 20 de orifici si inele de Ø85 mm/ Stainless steel flat bath cover with rings

Baile fara circulatie pentru utilizare in multiple aplicatii generale si speciale din microbiologie, analize de laboratoare medicale si laboratoare industriale.

Avantaje
- Afisaj digital cu display pentru temperatura si timpul programat
- Control digital pentru reglarea temperaturii
- precizie temperatura ±1°C
- Cuva interioara din otel inox
- Timer cronometric 1' la 9999'
- Elementul de incalzire, interiorul, sunt confectionate din otel inox
- pereti interioare dubli cu izolare termica
- Carcasa exterioara confectionata din inox vopsit cu vopsea epoxidica
- Semnal acustic la terminarea ciclului (timpul setat)
- Durata de incalzire poate fi presetata in continuu
- Baile de apa sunt livrate cu capac, inele reducatoare si furtun de drenaj (vezi date tehnice)

Conformitate - Certificate - Standarde
• Certificat de Calitate ISO 9001:2000
• Declaratie de Conformitate
• Certificat de garantie si 10 ani post garantie

Seria Auxi-TWB

Digital thermostatic baths are developed for samples/solutions to reachup an homogeneous temperature, being valid for general purposes like incubation processes, enzymatic reactions, fermentation, cultures andall in all, for research laboratories.
In order to obtain a better functioning, they have thermal isolation between the chamber and the external case, which allows a major general performance, better temperature homogenization and energy sa-ving.
The depth of the chamber allows major dip and contact of the samples with the heating source, which enables these equipment to beused for all kinds of analysis in biology, chemistry, medicine, etc.

Main characteristics
- Digital selection of parameters with real visualization of temperature and time displays
- Continuous mode or programmed periods with acoustic signal atthe end of the selected time
- Acoustic signal indicates overheating of the bath when its temperature exceeds in 10°C the selected temperature
- Hermetically sealed membrane keyboard5|Lid with holes (11 cm) and reduction rings (8 and 5 cm) included
- Electric draining pump with drainpipe (see exceptions)

Baile fara mixare sunt proiectate pentru utilizare in multiple aplicatii generale si speciale din microbiologie, analize de laboratoare medicale si laboratoare industriale.

Avantaje
- Control analogic pentru reglarea temperaturii
- precizie temperatura ±1,5°C
- Cuva interioara din otel inox
- Clasa protectie IP42
- Elementul de incalzire, interiorul, sunt confectionate din otel inox
- pereti interioare dubli cu izolare termica
- Carcasa exterioara modelul WB-M50 din otel galvanizat cu rezistenta la coroziune
- Carcasa exterioara celelalte modele din ABS cu rezistenta la coroziune

Conformitate - Certificate - Standarde
• Certificat de Calitate ISO 9001:2000
• Declaratie de Conformitate
• Certificat de garantie si 10 ani post garantie

Seria WB-M

Capacity 5 - 15 - 24 lt and 50 lt
Stainless steel tank (made by mould)
General safety switch
Analogic thermoregulator
Safety thermostat
High insulation between external case and tank
Bottom of the tank with rounded corner for easy cleaning

Accesorii optionale

Băi digitale termoreglabile forma cilindrica seria FALC BO-D sunt ideale pentru vase de forma sferica
construite din otel inox 18/8 cu izolatie / pereti dubli
Control electronic de temperatura cu microprocesor integrat tip PID si senzor de temperatura tip PT100
Termostat de siguranta cu avertizare bec rosu

Conformitate - Certificate - Standarde
• Certificat de Calitate ISO 9001:2000
• Declaratie de Conformitate
• Certificat de garantie si 10 ani post garantie

Seria FALC BM

The thermostatic water baths in the BO-D Series are made entirely of 18/8 stainless steel with double side and carrying handles.
The inner tank is molded from one single piece of steel.
The BO-D digital model features electronic pre-set temperature regulation thanks to the PID microprocessor; temperature control is provided by the PT 100 sensor and a second safety thermostat with red warning light.

Accesorii optionale pentru bai seria FALC BM

Băile de termostatare forma cilindrica FALC sunt ideale pentru vase de forma sferica

Conformitate - Certificate - Standarde
• Certificat de Calitate ISO 9001:2000
• Declaratie de Conformitate
• Certificat de garantie si 10 ani post garantie

Seria FALC BM

The moulded inner tank made from one single piece of 18/08 stainless steel without seams or seals to ensure perfect heat distribution and eliminate leaks.
The external housing is made from a strong sheet of 18/8 stainless steel whilst insulation between the housing and the tanks is provided by fiberglass.
Temperature control and regulation is provided by a thermostat with a graduated centigrad scale and fluid expansion immersion sensor.

Accesorii optionale pentru bai seria FALC BM

3 modele disponibile cu 1, 4 sau 6 locuri destinate evaporarii solventi sau solutii volatile (ex. cu sistem Soxhlet)
Interiorul baii si cadrul sunt confectionate din otel-inox deschiderile baii au diametrul de 130 mm si sunt acoperite cu cate un set de inele din plastic rezistent
In spatele fiecarui orificiu se afla o tija-suport din otel inoxidabil
Controlul temperaturii cu termostat analogic
Sistem automat de protectie a elementelor de incalzire la supraincalzire
Carcasa detasabila de 265 mm x Ø265 mm
Capac cu set inele fabricat din plastic rezistent la incalzire.
Diametrul deschiderii poate fi variat in aproximativ 20 mm pasul
Elemente de incalzire, interiorul baii, rama si suportul perforat deasupra elementului de incalzire sunt fabricate din otel inox
Carcasa exterioara rezistenta la coroziune fabricata din otel galvanizat electrolitic, acoperit cu vopsea epoxi
Dispozitivul de reglarea a nivelului de apa cat si capacul din 9 inele sunt incluse la livrarea aparatului

Conformitate - Certificate - Standarde
• Certificat de Calitate ISO 9001:2000
• Declaratie de Conformitate
• Certificat de garantie si 10 ani post garantie

Seria GFL

For gentle steaming work with Erlenmeyer flasks, glasses, etc.
GFL Water Baths models Steam Bath 1023 and Water Baths for fume hoods 1031 and 1032 havebecome indispensable in daily practice.
GFL Water Baths convince through their varied ranges of application.
For instance, the Steam Bath’s square coverframe (W 265 mm x L 265 mm) is removable.
Its 9-part set of rings, made of heat-resistant plastic material can be parted. Its diameter can be varied in approx. 20 mm steps (min. 32.5 /max. 173.5 mm).

GFL Multiple Water Baths 1041 / 1042 are especially suitablefor gentle steaming work with columns, Erlenmeyer flasks or beakers. Even after years of continuous operation theyremain to be the most reliable laboratory aids.
Applications
Chemical, clinical and biological laboratories, both in research and industry, decide on our Multiple Water Baths whenever special quality and quantityrequirements are to be fulfilled.

Support Rod made of stainless steel,length 316 mm, Ø 12 mm

2 modele disponibile cu 6 si 8 locuri bai utilizate in special pentru nise chimice cu sisteme de digestie; prevazute cu bare de sustinere cu inaltimea de 600 mm, 12 mm diametrul
domeniul de temperatura: de la 5°C peste temperatura mediului pana la temperatura de fierbere
temperatura este controlata de un termostat analogic integrat
sistem de protectie cu intrerupere la supratemperatura (supraincalzire), pentru protejarea elementele de incalzire
incinta si capacul sunt fabricate din otel inox
carcasa din otel galvanizat
regulator pentru nivelul apei, montat in partea dreapta a baii
capacele sunt acoperite cu inele din plastic rezistent la termo-rezistenti
prevazute cu picioare din cauciuc anti-alunecarii

Conformitate - Certificate - Standarde
• Certificat de Calitate ISO 9001:2000
• Declaratie de Conformitate
• Certificat de garantie si 10 ani post garantie

Seria GFL

Main Features
Temperature range from approx.5°C above ambient to boiling point, temperature regulation through tension thermostat.
Heating element protected by over-temperature cut-out.
bath GFL 1023 cover frame and perforated floor above the heatingelement are made of stainless steel.
bath GFL 1023 the adjustable water level regulator is situated at the back ofthe unit.
It is part of the standard scope of supply, as well as the set of rings made of heat-resistant plastic material.
bath GFL 1023: outer housing made of electrolytically galvanised sheet steel, powder-coated.
bath 1031/1032: removable recessed lid with holes and perforated floor above the heating element are made of stainless steel.
1031/1032: the adjustable water level regulator at the right-hand side of the unit is part of the standard scope of supply
1031/1032: the openings in the lid are covered by sets of rings made of heat-resistant plastic material.
1031/1032: four non-slip plastic feet ensure great stability.
Applications
Water Baths for fume hoods 1031 /1032 are special baths that are preferably used for protected applications in fume hoods (digestories).

Support Rod made of stainless steel,length 316 mm, Ø 12 mm

Bai de apa Termostatate pentru extractie - separare
Material constructie: OTEL INOX 18/8
Termoregulator bimetalic gradat in °C
Seria WB0-S: 3 modele disponibile cu 2, 4 si 6 bazine separate(bai individuale) cu controlor de temperatura termoreglabil pentru fiecare bazin
Seria WB-U: 3 modele disponibile cu 2, 4 si 6 locuri cu un singur bazin si un singur termoregulator
baile sunt utilizate in special pentru extractie cu sisteme de digestie, soxhlet
fiecare post este prevazut cu suport pentru bare de sustinere
domeniul de temperatura: de la 5°C peste temperatura mediului pana la 120°C
temperatura este controlata de un termostat analogic integrat
sistem de protectie IP42 cu intrerupere la supratemperatura (supraincalzire), pentru protejarea elementele de incalzire
incinta si capacul sunt fabricate din otel inox
regulator pentru nivelul apei pentru fiecare bazin de apa
capacele sunt acoperite cu inele din plastic rezistent la termo-rezistenti
prevazute cu picioare din cauciuc anti-alunecarii

Conformitate - Certificate - Standarde
• Certificat de Calitate ISO 9001:2000
• Declaratie de Conformitate
• Certificat de garantie si 10 ani post garantie

Seria de modele FALC WB-S si WB-U

Main Features
The FALC WB-U baths for extractors are available with single baths for the WB-u models, and multiple baths insulated separately with glass fibre for the WB-S models, for simultaneous precise operation of each tank at different temperatures.
Each tank is fitted with a filling and level device whilst the WB-u model is also fitted with a hole for a thermometer.
All baths are provided whit a bimetallic temperature regulator with graduated centigrade scale and sensor for each tank.

Support Rod made of stainless steel,length 316 mm, Ø 12 mm

baie Bunsen din cupru si otel alcatuit din vas rotund cu manere, capac tip inele concentrice, iesire pentru drenare condens, optional indicator nivel de apa

Main Features
Round Shallow form water bath ideal for heating flasks, bottles, tubes, etc.
Comes with concentric rings, water tank with two handles, steam escape outlet and water level indicator (optional)

Bec bunsen .. detalii »
- Suport baie .. detalii »