Aparate de testare rezistenta la abraziune uzura suprafata umeda uscata

ro Sisteme pentru testarea proprietatilor fizico-mecanice » Abrazimetre / Testere de uzura prin frecare » Tester de abraziune umeda si uscata

uk Universal Testing Systems » Abrasion Scrub Testers » Two-Channel Dry/Wet Abrasion Scrub Testers

Testare uzura prin frecare

Abrazimetre sunt aparate folosite pentru testare uzura prin frecare; determinarea rezistentei la abraziune; rezistenta la uzura si fisurare; testarea rezistentei la rupere; testarea uzurii si durabilitatii; rezistenta culorii la frecare uscata și umeda

 

abrazimetru

Aparat pentru testarea rezistentei la abraziune si frecare
Seria Gardner-scrub C5000


Solicit oferta personalizata »

RFQ »

Abrazimetre automate

Acest instrument poate fi folosit intr-un numar foarte mare de aplicatii care presupun testarea rezistentei materialelor la stres mecanic.
• Se bazeaza pe trecerea repetata a unor palete de diverse forme peste suprafata testata.
• Se obtin astfel detalii legate de rezistenta la spalare, la factori abrazivi si la factori de stres mecanic.
• Abrazimetrul este dotat cu doua perii mecanice si pompa peristaltica pentru dispersia lichidului.
• Se poate programa numarul de treceri a periilor precum si debitul pompei peristaltice.
• Respecta standardele ASTM D2486, DIN 53778, ISO 11998 si DIN 13300.
• Setul complet include aparatul, 2 suporti pentru perii, 2 perii si 2 palete, 100 suprafete din plastic
• Dimensuni: 660 x 480 x 420 mm
• Greutate: 32 kg

Domenii de aplicatie
Se pot analiza lacuri si vopsele pe diverse suprafete, materiale plastice, panze si tesaturi, articole din pielarie, cerneluri si tiparituri; etc.

Accesorii optionale
Chituri pentru modificarea unui abrazimetru pentru a fi utilizat si conform altor standarde
se pot achizitiona chituri pentru modificarea unui abrazimetru pentru a fi utilizat si conform altor standarde

Certificate
• Certificat de calitate, conformitate, ISO, CE
• ASTM: D 2486, D 3450, D 4213, D 4828
• DIN: EN 53778*, 13 300
• ISO: 11998
» Certificate ISO furnizor si service autorizat (MultiLab Romania)
» Certifcat de garantie si post garantie

Versiuni optionale
- Model 5060 Abrazimetru conform DIN 53778
- Model 5061 Abrazimetru conform ISO 11998 si DIN 13300
- Model 5063 Abrazimetru conform ASTM D 2486

Abrasion tester for abrasion and washability testing applications
C5000 Gardner-scrub Series :: BYK-Gardner

Main features
Abrasion tester is compliant with ASTM methods for coating and paint abrasion resistance.
The Gardner-scrub abrasion tester offers a versatile design for abrasion and washability testing applications.
Reciprocating linear motion at 37.0 cycles per minute
Constant speed control over 10 inch travel
For wet or dry abrasion testing
Preset count-down counter with automatic shut-off
Heavy-duty drive system for low maintenance and long-life
Utilizes brush, sponge, abrasive pads, and sand paper
Compliant with ASTM D2486
Economical price

Technical data
Reciprocating linear motion with a constant speed over the travel distance for repeatable results
Compact design saves on counter space
Easy to use touch screen display
Instruments arm holds up to 3 brush or pad holders to increase output
User selectable scrub rate from 6 - 60 cycle/minute
Compliant with ASTM, DIN, and ISO methods with appropriate accessories
Up to 4 kg (8.8 lbs) can be applied to the instrument arm
Adjustable stroke length 22.9 - 27.9 cm
Optional weighs for custom applications

Model Versions
- Model 5060 Gardner-scrub, base model
- Model 5061 Gardner-scrub, ASTM D2486
- Model 5063 Gardner-scrub, ISO 11998

 
tester_frecare_textile

Abrazimetru automat / Test de curatare și rezistenta la frecare umeda / uscata
Seria TQC AB5000

 

Solicit oferta personalizata »

RFQ »

Abrazimetre automate

Aparat complet automat destinat determinarii rezistentei vopsirilor materialelor textile la frecare si pentru test de curatare și rezistenta la frecare umeda si uscata masurata conform SR 13300:1994 si SR EN ISO 11998:2002 acest Acestui aparat cuprind intreg sectorul de fabricatie al textilelor deoarece asigura testarea rezistentei la frecare si la cedare prin frecare pe alte materiale a vopsirii materialelor textile de orice natura : fire, ate, tesaturi (inclusiv plusate), tricoturi, covoare, inclusiv acoperitoare de sol si alte tesaturi velur.

Domenii de aplicatie
Laboratoare de incercari ale materialelor textile
Producatori de detergenţi şi de agenţi tensioactivi pentru curatarea si tratarea
Producatori de materiale textile vopsite
Comercianti de materiale textile vopsite
Agenti vamal si de Protectiei Consumatorilor.

Certificate
» Certificate ISO furnizor si service autorizat (MultiLab Romania)
» Certifcat de garantie si post garantie

• Se bazeaza pe trecerea repetata a unor palete de diverse forme peste suprafata testata.
• Se obtin astfel detalii legate de rezistenta la spalare, la factori abrazivi si la factori de stres mecanic.
• Abrazimetrul este dotat cu doua perii mecanice si pompa peristaltica pentru dispersia lichidului.
• Se poate programa numarul de treceri a periilor precum si debitul pompei peristaltice.
• Respecta standardele: SR ISO 105; SR EN 20811 ISO 811; ASTM D2486, DIN 53778, ISO 11998 si DIN 13300.
• Setul complet include aparatul, 2 suporti pentru perii, 2 perii si 2 palete, 100 suprafete din plastic
• Afisaj grafic digital
• Acuratete: ± 1%
• Precizie: ± 0.01 mm / 4 mil
• Durata unui ciclu / Viteza parcursul ajustabila intre: 1 – 60 strokes / minut
• Cursa capului de frecare / cursa dubla : 20 - 300 mm
• Oprire automata la efectuarea numarului de cicli
• Latimea canalul: 80 mm / max.
• Lungimea panoul: 350 mm / max.
• Grosimea panoul: 35 mm / max. in mijloc
• Dimensuni: 650 x 350 x 350 mm
• Greutate: 35 kg
• Alimentare: 220 Vca; 50 Hz;

Accesorii optionale
• AB5010 peria par de porc 60g conform DIN 53778
• AB5011 perie de 60g si 100g conform ASTM D2486
• AB5012 burete de 60g si100g conform ASTM D4213-92 / D4828
• AB5013 suport abraziv (fara greutati) conform ISO 11998
• AB5014 greutate de 60g
• AB5015 greutate de 100g
• AB5016 Set de 5 capete abrazive pentru AB5013
• AB5019 Set de 5 burete
• AB5012 VF2179 - aplicator cu rezervor dublu

Wet Abrasion Scrub - Washability Test
TQC

Standards: ASTM D2486, ASTM D3450, ASTM D4213, ASTM D4828, ASTM F1319, ISO 11998

Main features
TQC Automatic Washability Test to perform a Abrasion and washability scrub test on coated panels to define the resistance of paint, varnish or related products to scratching, wear and colour- and gloss loss due to wet or dry scrub abrasion. Simulating everyday wear from cleaning actions or general use.
Also suitable for testing plastics, woodpanels, kitchentops, white goods etc.
The test is either used as a “pass / fail” test by testing to a specified number of strokes or defining the minimum number of strokes at which a coating fails by checking at regular intervals.
The TQC wet abrasion scrub testers are also suitable to test the performance of of cleaning agents and compounds.
Many standards require dry or wet abrasion and scrub test to be performed to determine the quality of coating. Like the EN 13300 for example. This standard defines a quality ranking for interior coatings to wet abrasion.
The TQC Automatic Washability Tester is driven by a micro-step controlled electro motor which allows precise and steady speed and sinus wave form control. Operation is intuitive by means of a jog-dial switch and a multi-lingual operating menu on a large illuminated display.
The two integrated pumps allow the user to test two fluids simultaneously.
Per pump two test beds are fed and can be controlled separately. This allows the TQC Automatic Washability Tester to be used both in coating industry and detergent industry.
The adjustable tool carrier allows the user to safely perform test on a wide array of samples.

Technical Data
Stroke speed : 1 – 60 cycles per minute
Stroke length : 20 - 300 mm
Max panel width : max 70 mm
Max panel length : max 350 mm
Max panel height : max. 35 mm
Pump speed : 0,0 - 3,0 ml (only AB5000, AB5005)
Noise level The continuous noise level from the instrument does not exceed 70 dB.
Dimensions: 650 x 350 x 350 mm
Weight: approx. 35 kg
Power supply : 115 – 230 V, 50 - 60 Hz
Power consumption : max. 80 Watt
Display: Blue illuminated, graphic 100 x 35 mm, 193x64 pixels
Safety: Emergency button, integrated acoustic alarm
Function: Jog shuttle knob by rotation / pushing
Accuracy: Tool carrier speed accuracy : +/- 1% of set speed
Stroke length accuracy: +/- 0.01 mm (with empty carrier)

ORDERING INFORMATION
- Model AB5210 TQC Automatic Washability Test 230VAC without dosing pumps
- Model AB 5215 TQC Automatic Washability Test 110VAC without dosing pumps
- Model AB5000 TQC Automatic Washability Test 230VAC with dosing pumps
- Model AB5005 TQC Automatic Washability Test 110VAC with dosing pumps

 
abrasion_tester

Aparat pentru testarea rezistentei la abraziune si spalare
Seria Elcometer 1720


Solicit oferta personalizata »

RFQ »

Aparat pentru testarea rezistentei la abraziune, spalare si periere a unei game foarte largi de materiale cum ar fi vopsea, lacuri, cerneluri, acoperiri, piele, lemn, plastic, material printat, textile, etc.

Avantaje
unelte interschimbabile;
cu sau fara pompa de dozare lichid
modele cu 2 sau 4 statii de testare
viteze fixe si variabile.

Certificate
» Certificate ISO furnizor si service autorizat (MultiLab Romania)
» Certifcat de garantie si post garantie

Date tehnice
Lungime cursa de deplasare: 10 mm la 300 mm
Viteza de deplasare: 10 cicluri/min pana la 65 cicluri/min
Numar maxim de cicluri: 32760
Tensiune de lucru: 230V /50 Hz
Putere: 70 W
Numar faze: 1
Dimensiune: 550 x 460 x 320 mm
Greutate: 2 satii: 31,5 kg; 4 statii: 33 kg
Temperatura de lucru: +50C pana la +40°C

perie din par de mistret pentru unealta 1
perie cu peri din nailon pentru unealta 2
foi abrazive pentru curatare/reconditionare perii cu par de mistret si peri din nailon, pachet de 4 bucati
bureti pentru uneltele 3 si 4, pachet de 5 bucati
burete/material abraziv pentru unealta 5, pachet de 5 bucati
blocuri abrazive pentru unealta 6, pachet de 10 bucati
blocuri abrazive pentru unealta 6, pachet de 100 bucati
rola abraziva 25 mm pentru unealta 7
discuri pentru unealta 10, pachet de 2 bucati
greutate 50g pentru uneltele de la 1 la 8 & 10
greutate 100g pentru uneltele de la 1 la 8 & 10
greutate 200g pentru uneltele de la 1 la 8 & 10
greutate 227g pentru uneltele de la 1 la 8 & 10
greutate 500g pentru uneltele de la 1 la 8 & 10
planse din plastic Leneta, negru, cutie cu 100 bucati
planse din plastic leneta, alb, cutie cu 100 bucati
agent abraziv
banda metalica 250 µm pentru standardul ASTM D2486
placuta din sticla, 478 x 165mm
clema canal
tub pompa
cheie inbus (pentru setarea instrumentului)
T-Bar (pentru setarea instrumentului)
surubelnita (pentru setarea instrumentului)
kit extindere unitate 2-4 statii pentru Elcometer 1720 Abrasion Tester (model M202)
kit extindere unitate 2-4 statii pentru Elcometer 1720 Abrasion & Washability Tester (model M302)

Abrasion and Washability Tester
Elcometer 1720

These robust, reliable and extremely versatile machines have been designed for testing the washability, brushability and resistance of a wide range of materials including paint, lacquers, inks, coatings, leather, wood, plastics, printed material, fabrics etc.

Main features
Made from anodised aluminium making it durable and robust
All stations can be tested wet or dry
The durable and robust design is stable under test allowing repeatable results, even at the fastest stroke speeds
Rapid tool change
Test up to 4 samples simultaneously
Multi-lingual digital display
User adjustable stroke length from 10 to 300mm (0.4 to 11.8”)
Speed Cycles can be adjusted from 10 to 65 cycles per minute or set to the ISO Standard of 37 cycles /min
Wide range of tools available, for testing flat and curved samples

Technical data
Made from anodised aluminium making it durable and robust
All stations can be tested wet or dry
The durable and robust design is stable under test allowing repeatable results, even at the fastest stroke speeds
Rapid tool change
Test up to 4 samples simultaneously
Multi-lingual digital display
User adjustable stroke length from 10 to 300mm
Speed Cycles can be adjusted from 10 to 65 cycles per minute or set to the ISO Standard of 37 cycles /min
Wide range of tools available, for testing flat and curved samples
Available with or without an integrated liquid dosing pump

Meeting Standards
With the wide range of tools available many Standards can be tested in one unit
All units can be used in accordance with ASTM, DIN, EN and ISO Standards
Easily adjustable to customers unique applications using the special tools
Washability and abrasion testing on flat and curved samples up to 13mm thick

Ordering information
- Model K1720M202 :: Elcometer 1720 Abrasion Tester, 2 Station (110 - 240V)
- Model K1720M204 :: Elcometer 1720 Abrasion Tester, 4 Station (110 - 240V)
- Model K1720M302 :: Elcometer 1720 Abrasion & Washability Tester, 2 Station (110 - 240V)
- Model K1720M304 :: Elcometer 1720 Abrasion & Washability Tester, 4 Station (110 - 240V)