|
|
|
Cod.Prod.
|
Oxigenometre** |
|
|
JNW-Ox970 |
Oxigenometru
de buzunar
Model Jenway 970
Oxigenometru portabil, set complet
cu electrod, membrana de schimb, solutie de curatare si intretinere.
Aparatul este insotit de cutie speciala pentru transport si depozitare
si are manual de utilizare. Are ecran LCD pentru afisare rezultate,
carcasa este conform standard de siguranta IP67, are design ergonomic.
Are functie de pastrare a valorii inregistrate iar bateriile permit
functionare 500 ore (2 baterii AA).
Easy to read with back lit liquid crystal display Rugged and robust
design, IP67 rating Reading hold function Choice of measurement
modes - %DO2 or mg/l-1 Readings corrected for temperature, pressure
and salinity 500 hours battery life Now supplied with free carrying
case |
 |
| |
detalii 
|
|
|
HNA-Ox |
Oxigenometru
de buzunar
Model
Hanna HI-8043
Oxigenometru
portabil, complet electronic Are ecran LCD pentru afisare rezultate.
The
HI-8043 is our entry level electronic dissolved oxygen meter. It
measures and displays dissolved oxygen readings in mg/L and via
a rotary switch on the front of the meter, temperature readout can
also be selected. |
 |
detalii
|
|
|
WTW-Oxi
1 |
Oxigenometru
de buzunar
Modelele Oxi 315i, Oxi 330i, Oxi 340i
Oxigenometre
antiacvatice, submersibile, cu
baterii, afisare a temperaturii, memorie de date | Functionare
conform GLP | Afisare automata a temperaturii | Compensare a presiunii
si salinitatii | Modelul Oxi 330i are in plus memorie de date
| Modelul Oxi 340i este similar Oxi 330i avand in plus iesire
RS 232 alimentare la retea (optional) | Se poate livra ca set
ce cuprinde: geanta profesionala cu compartimente separate pentru
senzor si accesorii, oxigenometru cu baterii sau cu baterii reincarcabile,
senzor de oxigen la alegere, sistem de calibrare OxiCal-SL, 3
membrane de schimb WP 90/3, solutie de curatare RL/G, solutie
electrolit Ely/G, film abraziv SF 300, fisa pentru conectarea
la retea (numai pentru Oxi 340i).
Garantie 3 ani.
Pocket-size
precision WTW handheld oxygen meters are both dustproof and waterproof
as well as being submersible. The large clear display with operator
guidance allowsb the measurements to be read off unambiguously
and comfortably |
 |
detalii |
|
| WTW-Oxi
2 |
Oxigenometru
portabil & de laborator
Modelul
Oxi 197i
antiacvatic
(IP 66) submersibile (IP 67) cu maner si curea pentru transport
| Functiune GLP | Compensare automata a temperaturii | Memorie
800 date | Compensare automata a presiunii aerului cu senzorul
incorporat | Posibilitate de conectare a agitatorului StirrOxG
| Sistem de calibrare OxiCal | Interfata RS 232 unidirectionala
| Functioneaza cu baterii sau alimentat la retea | Poate efectua
masuratori la adancimi de pana la 100m cu armatura TA-197Oxi |
Certificare CE, UL/CUL - Garantie 3 ani.
The
WTW oxygen meters of the ProfiLine Oxi 197i series are both hose-proof
(IP 66) and submersible (IP 67). This easy to use meter conforms
to GLP and has an 800 data point datalogger and accurate recorder
output. External control via PC with MultiLab® pilot. They are
equipped with a carrying/support handle and carrying strap as
standard. The Oxi 197i is suitable for depth measurements down
to 330 ft (100 m) in combination with the TA 197 Oxi depth armature. |
 |
detalii |
|
| WTW-Oxi
3 |
Oxigenometru
de laborator
Modelele InoLab-Oxi 730/740
Oxigenometru de laborator cu senzor
de oxigen cu auto-agitare StirrOx G | Corectie automata a presiunii
aerului | Compensare automata a temperaturii cu metoda IMT| Sistem
de calibrare OxiCal | Memorie de date | Iesire analoga sau digitala
a datelor RS 232 sau imprimanta incorporata (hartie de 112 mm)
| Poate lucra cu senzorul StirrOx G pentru determinarea BOD5 conform
DIN 38 409 P51 cu functionare manuala start/stop. " Protectie
IP 43 | Certificare CE, UL/UL - 3 ani garantie.
Laboratory Oxygen Meters : Standard laboratory
oxygen meter with large multifunctional display for routine use
in the laboratory. Automated functions such as air pressure correction,
temperature compensation and OxiCal® rapid calibration make work
easier. Datalogger, analog and digital output RS 232 as well as
the optional built-in printer guarantee QA-conform documentation. |
 |
detalii
|
|
| WTW-OxiSnz |
Senzori
- O2
Senzori pentru
modelele WTW-OXI 1, 2 si 3
SENZORI
StirrOxG - Sensor de oxigen cu autoagitare si masurare simultana.
- La debite constante are reproductibilitate ridicata. " Masurare
imediata nu necesita perioada de polarizare. - Auto -consumul
propriu de oxigen este extrem de mic, doar 0.008 gh-1(mg/l)-1.
- Nu necesita calibrare in zero. - Se livreaza ca standard cu
vase de calibrare si de stocare OxiCal-ST. - Durata de viata a
membranei pana la 6 luni. " Compensarea automata a temperaturii
se face cu doi senzori de temperatura incorporati. " Monitorizarea
scurgerilor din membrana - aparatul indica orice deteriorare a
membranei.
Vezi
tabelul de selectie pentr senzori si accesorii optionale
>> |
|
|
detalii |
|
|
APARATE
PENTRU DETERMINAREA CONSUMULUI BIOCHIMIC DE OXIGEN (BOD) |
|
BOD-IS |
Metoda
manometrica
Modelele
OxiTop IS 6, IS 12
Sistem pentru determinarea BOD. Are 6 sau 12 posturi de analiza
si include accesoriile necesare pentru aceste determinari. Fiecare
post este alcatuit din: sistem de detectie OxiTop, sticla bruna
pentru proba, garnitura cauciuc, bara de agitare. In afara de acestea,
pachetul complet mai include: platforma de agitare, pensa pentru
indepartarea barelor de agitare, reactiv NaOH (fulgi), inhibitor
nitrificare, vas pentru prea-plin 164 ml, vas pentru prea-plin 432
ml, hartie milimetrica.
Measurement using OxiTop® isbased on pressure
measurement in a closed system: microorganisms inthe sample consume
the oxygenand form CO2. This is absorbedby NaOH, creating a vacuumwhich
can be read directly as ameasured value in mg/l BOD. |
 |
detalii |
|
|
BOD-Con |
Metoda
manometrica
Modelele
OxiTop Control 6 si OxiTop Control 12
Cap de masura cu senzor piezoelectric
OxiTop®Control is the logical further development
of the successful OxiTop®systemusing software-controlled functions
and infrared interface to communicate with ahandy controller, the
OC 100. This system enables the simultaneous and groupedstart, management,
storage and tracking of 100 measuring heads via the controllerand
tracked on a large display with graphic evaluation. Data can be
transferred tothe PC for evaluation and documentation via the AK-540/Bcable
(order no. 902842)and the communication programAchat OC(order no.
208 990).Controller OC 110 in combination with the OxiTop®Control
S6 / S12 is ideal forusers with other applications apart from BOD
|
 |
detalii |
|
|
BOD-VLP |
Metoda
manometrica
Modelele
BMS6 si BMS10
Sistemul BOD Sensor System
6 este in conformitate cu toate normele de protectie pentru mediu
cat si pentru operator. Valorile sunt exprimate si afisate direct
in mg/l. Valorile CBO5 (ppm) pot fi afisate in fiecare zi, chiar
si dupa perioada standard de 5 zile. Dupa determinarea valorilor
de BOD5 este posibila si determinarea BOD-ului total. Materialul
de constructie este din otel inox protejat un strat de epoxy ceea
ce-i confera o rezistenta foarte buna impotriva coroziunii chimice.
Motorul permite o agitare continua, fara riscul unor intreruperi
sau supraincalziri ceea ce ar putea afecta rezultatele determinarilor
BOD.
Apparatus for Biochemical Oxygen Demand determinations
up to 1000 ppm or higher values after sample dilution. Epoxy painted
metal structure studied and tested in order to give to the istrument
an excellent resistance to the attack of chemical and mechanical
agents and to corrosion in general. The apparatus holds 6 (BMS 6)
or 10 bottles (BMS 10). The measuring scales are, respectively,
up to 90, 250, 600, 1000 mg/l BOD. |
 |
detalii |
|
|
BOD-7 |
Metoda
directa (cu oxigenometru)
Oxigenometru
de laborator
Modelul inoLab BSB/ BOD 740
Oxigenometru special conceput pentru masurarea consumului biochimic
de oxigen conform standardelor internationale. - Poate memora pana
la 540 de probe diluate. - Daca se foloseste memoria suplimentara
si optiunile de editare a pilotului MultiLab, intregul process de
masurare poate fi controlat prin PC. - In combinatie cu StirrOx
G, impreuna cu functia start/stop, InoLab BSB/DOD-740 este un aparat
ideal pentru masuratori de BOD5. Protectie IP 43 | Certificare CE,
UL/UL - 3 ani garantie.
inoLab® BSB/BOD 740 : laboratory oxygen meter
specially developed for BODn measurements. the BOD measurements
are determined by regulation EN 1899-1 and is EPA approved. stores
up to 7 of routines for frequently occurring dilution ratios. -
30 measuring samples each with 18 dilutions allow the management
of up to 540 diluted samples. - can also be used as a conventional
high-end oxygen meter (For technical data such as inoLab® Oxi 740
). - Additional memory and editing options are available when operated
using the MultiLab® pilot. The entire measurement and sample management
can thus be easily handled via PC. more
>> |
|
detalii |
|
|
BOD-197i |
Metoda
directa (cu oxigenometru)
Oxigenometru
Portabil si de laborator
Modelul ProfiLine Oxi 197i
Oxigenometru de laborator cu sensor cu agitare pentru oxigen StirrOx-G.
" Aparat robust, cu acuratete ridicata poate opera atat cu baterii
cat sialimentare la retea. " Este antiacvatic (IP 66) si submersibile
(IP 67) cu maner si curea pentru transport " Functiune GLP " Compensare
automata a temperaturii " Memorie 800 date " Compensare automata
a presiunii aerului cu senzorul incorporat " Posibilitate de conectare
a agitatorului StirrOx G" Sistem de calibrare OxiCal " Interfata
RS 232 unidirectionala " Poate efectua si masuratori la adancimi
de pana la 100m cu armatura TA 197 Oxi " Certificare CE, UL/CUL
" Garantie 3 ani "
The
WTW oxygen meters of the ProfiLine Oxi 197i series are both hose-proof
(IP 66) and submersible (IP 67). This easy to use meter conforms
to GLP and has an 800 data point datalogger and accurate recorder
output. External control via PC with MultiLab® pilot. They are equipped
with a carrying/support handle and carrying strap as standard. The
Oxi 197i is suitable for depth measurements down to 330 ft (100
m) in combination with the TA 197 Oxi depth armature. |
|
detalii |
|
|
|
|
|
